EFFECT OF MOISTURE CONTENT OF TWO VARIETIES OF PALM KERNEL ANDSHELL ON THE COEFFICIENT OF SLIDING FRICTION OF A LOCAL FABRIC
DOI :
https://doi.org/10.62050/fjst2025.v10.n1.624Mots-clés :
Local fabric, moisture content, coefficient of sliding friction, frictional separationRésumé
The frictional properties of a material are useful in designing equipment for crop processing and storage. The effect of moisture content of two varieties of palm kernel and shell on the coefficient of sliding friction of a local fabric was determined. An oven drying method at 105 oC was used to determine the moisture content according to ASAE Standards. The moisture content of dura and tenera varieties were 17.4 and 18.2 % (w.b.) which were individually adjusted to 9, 13 and 17 % by adding 76.3, 39.8 and 3.3 g; and 82.3, 46.4 and 10.6 g distilled water respectively. The angle of repose apparatus was used to determine the coefficient of sliding friction of palm kernel and shell of dura and tenera varieties on the two faces of local fabric. The coefficient of sliding friction for dura kernel and shell on the two faces of a local fabric ranged from 0.384-0.655 for 9 %; 0.484-0.706 for 13 %; and 0.462-0.695 for 17 %. The coefficient of sliding friction for tenera kernel and shell on the two faces of a local fabric ranged from 0.660-0.947 for 9 %; 0.711-0.852 for 13 % and 0.611-0.902 for 17 %. The moisture contents of dura palm kernel, tenera palm kernel and tenera palm shell had significant effect (p<0.05) on the coefficient of sliding friction on face A and face B of the local fabric but moisture content of dura palm shell had no significant effect (p>0.05) on the coefficient of sliding friction.
##plugins.themes.default.displayStats.downloads##
Références
Adepoju, V. O. (2019). Design and fabrication of a draper separator for palm kernel and shell. Unpublished Master of Engineering Thesis, Department of Agriculture and Bio-Resources Engineering, Federal University of Agriculture, Abeokuta.
Adepoju, V. O., Aderinlewo, A. A., O. U. Dairo, Adetunji, O. R. and Babalola, A. A. (2023). Determination of some physical properties of palm kernel and shell in relation to frictional separation. Journal of Natural Science, Engineering and Technology, 22(1), 39-52.
Akubuo C. O. and Eje B. E. (2002). Palm kernel and shell separator. Biosystems Engineering, 81(2), 193-199, DOI: 10.1016/j-biosystemseng.2001.0029.
ASAE Standards (1998). Moisture measurement – unground grain and seeds. American Society of Agricultural Engineers (ASAE), S352.2:551.
Davies, R. M. and Zibokere, D. S. (2011). Effect of moisture content on some physical and mechanical properties of three varieties of cowpea (Vigna unguiculata (L)Walp). Agric Eng. Int: CIGR Journal, 13(1), 1-8.
Emeka, V. E. and Olomu, J. M. (2007). Nutritional evaluation of palm kernel meal types: Proximate composition and metabolizable energy values. African Journal of Biotechnology, 6(21), 2484-2486.
Olaoye, J. O. and Babatunde, O. O. (2011). Coefficient of friction of agricultural materials and stone as it affects particle motion and separation of inclined belt conveyor. LAUTECH Journal of Engineering and Technology, 6(2), 64 – 71.
Olasumboye, A. and Koya, O. (2014). A rotary separator for the dry mixture of palm kernel and shell. Innovative Systems Design and Engineering, 5(7), 32-41.
Olayanju, T. M. A. (2002). Design, fabrication and evaluation of a beniseed (Sesamum indicum L.) oil expeller. An Unpublished PhD. Thesis at the Department of Agricultural Engineering, University of Ibadan, Nigeria.
Orhevba, B. A., Chukwu, O., Osunde, Z. D. and Ogwuagwu, V. (2013). Influence of moisture content of the yield of mechanically expressed neem seed kernel oil. Academic Research International, 4(5), 252 – 257.
Sitkei, G. (1986). Mechanics of Agricultural Materials. Elsevier Pub. Amsterdam, pp. 352-369.
Téléchargements
Publiée
Numéro
Rubrique
Comment citer
